Potting & Molding system
Insulation material
Molding materials for electric and electronic parts are HTE-series product. It is an eco-friendly product that has excellent electrical insulation and workability, and does not contain RoHS-regulated hazardous substances. In addition, it exhibits excellent performance when used as a molding material for various electric and electronic parts.
| Product Name | Mix Ratio | Viscosity(cps,25℃) | Tg(℃) | Curing condition | Application |
|---|---|---|---|---|---|
| HTE-100 | 100 : 20 | 35,000~55,000 500~800 |
70~80 | 25℃x 12h or 60℃x 1h |
Fast cure type |
| HTE-103 | 100 : 50 | 1,500~3,000 50~150 |
75~85 | 25℃x 24h or 60℃x 2h |
Low viscosity. Noise filter/ Condenser/ Gas range/ Boiler igniter/ Sensor molding |
| HTE-106-1 | 100 : 50 | 7,000~10,000 150~350 |
70~80 | 25℃x 24h or 60℃x (1~2)h |
Excellent acid resistance. Battery +/- box molding |
| HTE-110 | 100 : 20 | 50,000~70,000(40℃) 50~100 |
75~85 | 25℃x 24h or 60℃x 2h |
High viscosity. PCB molding for security |
| HTE-120 | 100 : 20 | 25,000~35,000 50~150 |
75~85 | 25℃x 24h or 60℃x 2h |
Solenoid molding |
| HTE-140 | 100 50 | 8,000~15,000(40℃) 150~250 |
80~90 | (100℃x 2h) + (120℃x 8h) |
Hot cure type. Electromagnetic switch coil/ AC Motor/ Submersible motor molding |
| HTE-150 | 100 : 50 | 7,000~13,000(40℃) 5,000~10,000(40℃) |
75~85 | (100℃x 2h) + (120℃x 8h) |
Hot cure type. Excellent thermal shock resistance, Electromagnetic switch coil molding |
| HTE-160 | 100 : 20 | 4,000 ~ 8,000 (25℃) 5 ~ 15 (25℃) |
75~85 | 25℃ x 24h or 60℃ x 2h |
Room temperature curing Epoxy RoHS compliant, eco-friendly products Excellent electrical properties, adhesive strength, and coil impregnation Coil impregnation and molding material for electrical and electronic parts |
| HTE-164 | 100 : 25 | 10,000~20,000 50~150 |
70~80 | 25℃x 24h or 60℃x 1h |
Excellent thermal shock resistance, Automobile interior/exterior molding |
| HTE-170 | 100 : 100 | 35,000~45,000 15,000~25,000 |
80~90 | 120℃x (6~8)h | Hot cure type. Case gap molding |
| HTE-180 | 100 : 80 | 4,000 ~ 8,000 (25℃) 30 ~ 70 (25℃) |
80 ~ 90 | 100℃ x 2h | High temperature curing Epoxy Excellent electrical and mechanical properties Excellent adhesive strength and heat resistance Molding material for electrical and electronic parts |
| HTE-220 | 100 : 100 | 65,000~85,000 55,000~75,000 |
75~85 | 25℃x (6~12)h | Fast cure & High viscosity. Solenoid molding |
| HTE-310 | 100 : 20 | 50,000~70,000 50~100 |
75~85 | 25℃x 24h 60℃x 2h | Room temp. cure type. Case gap molding |
| HTE-610 | 100 : 10 | 20,000~40,000(60℃) 2,000~4,000 |
85~95(Tg) | (110~120)℃x(8~12)h | Defense industry application High thermal & crack resistance |
| HTE-650 | 100 : 25 | 3,000~7,000 10~30 |
75~85 | 100℃x(2~4)h | Terminal Molding High crack resistance |
| HTS-529 | 100 : 100 | 7,000~17,000(40℃) 25,000~45,000(40℃) |
85~95(Tg) | 120℃x12h | Linear motor molding High mechanical properties High crack resistance |
| HTS-529-1 | 100 : 100 | 10,000~20,000(40℃) 30,000~50,000(40℃) |
85~95(Tg) | 100℃x(3~4)h | Linear motor molding Fast-cure type |
| HTS-2600 | 100 : 100 | 15,000~18,000 13,000~15,000 |
85-90(Tg) | (90℃x2h)+(120℃x4h) | UL-94 V-0 grade Ultra high voltage application, Excellent electrical properties. |
| HTS-2700 | 100 : 20 |
25,000~18,000 50~80 |
85-90(Tg) | (90℃x2h)+(120℃x4h) | UL-94 V-0 grade Ultra high voltage application, Excellent electrical properties. |
| HM-1000 | 100:25 |
30,000~40,000 100~200 |
80~90 | 70℃x1h | Mock-up resin (Automobile) |
